PlayStation
According to the book "Game Over", by David Scheff, the first conceptions of the PlayStation date back to 1986. Nintendo had been attempting to work with disc technology since the Famicom, but the medium had problems. Its rewritable magnetic nature could be easily erased (thus leading to a lack of durability), and the discs were a copyright infringement danger. Consequently, when details of CDROM/XA (an extension of the CD-ROM format that combines compressed audio, visual and computer data, allowing all to be accessed simultaneously) came out, Nintendo was interested. CD-ROM/XA was being simultaneously developed by Sony and Phillips. Nintendo approached Sony to develop a CD-ROM add-on, tentatively titled the "SNES-CD". A contract was signed, and work began. Nintendo's choice of Sony was due to a prior dealing: Ken Kutaragi, the person who would later be dubbed "The Father of PlayStation", was the individual who had sold Nintendo on using the Sony SPC-700 processor for use as the eight-channel ADPCM sound synthesis set in the Super Famicom/SNES console through an impressive demonstration of the processor's capabilities.
Sony also planned to develop another, Nintendo compatible, Sony-branded console, but one which would be more of a home entertainment system playing both Super Nintendo cartridges and a new CD format which Sony would design. This was also to be the format used in SNES-CD discs, giving a large degree of control to Sony despite Nintendo's leading position in the video gaming market.
The SNES-CD was to be announced at the June 1991 Consumer Electronics Show (CES). However, when Hiroshi Yamauchi read the original 1988 contract between Sony and Nintendo, he realized that the earlier agreement essentially handed Sony complete control over any and all titles written on the SNES CD-ROM format. Yamauchi decided that the contract was totally unacceptable and he secretly canceled all plans for the joint Nintendo-Sony SNES CD attachment. Instead of announcing a partnership between Sony and Nintendo, at 9 a.m. the day of the CES, Nintendo chairman Howard Lincoln stepped onto the stage and revealed that Nintendo was now allied with Philips, and Nintendo was planning on abandoning all the previous work Nintendo and Sony had accomplished. Lincoln and Minoru Arakawa had, unbeknown to Sony, flown to Philips headquarters in Europe and formed an alliance of a decidedly different nature熔ne that would give Nintendo total control over its licenses on Philips machines.
After the collapse of the joint project, Sony considered halting their research, but ultimately the company decided to use what they had developed so far and make it into a complete, stand alone console. As a result, Nintendo filed a lawsuit claiming breach of contract and attempted, in U.S. federal court, to obtain an injunction against the release of the PlayStation, on the grounds that Nintendo owned the name.[citation needed] The federal judge presiding over the case denied the injunction and, in October 1991, the first incarnation of the new Sony PlayStation was revealed. However, it is theorized that only 200 or so of these machines were ever produced.
By the end of 1992, Sony and Nintendo reached a deal whereby the "Sony Play Station" would still have a port for SNES games, but Nintendo would own the rights and receive the bulk of the profits from the games, and the SNES would continue to use the Sony-designed audio chip. However, Sony decided in early 1993 to begin reworking the "Play Station" concept to target a new generation of hardware and software. As part of this process the SNES cartridge port was dropped and the space between the names was removed.
The PlayStation went through a number of variants during its production run, each accompanied by a change in the part number. From an external perspective, the most notable change was the gradual reduction in the number of external connectors on the unit. This started very early on葉he original Japanese launch units (SCPH-1000) had an S-Video port, which was removed on the next release. This also led to the strange situation where the US and European launch units had the same part number series (SCPH-100x) as the Japanese launch units, but had different hardware (Rev. C silicon and no S-Video port)葉hey were the same as the Japanese SCPH-3000, so for consistency should have been SCPH-3001 and SCPH-3002 (this numbering was used for the Yaroze machines, which were based on the same hardware and numbered DTL-H3000, DTL-H3001, and DTL-H3002). This series of machines had a reputation for CD drive problems葉he optical pickup sled was made of thermoplastic, and eventually developed wear spots that moved the laser into a position where it was no longer parallel with the CD surface預 modification was made that replaced the sled with a die-cast one with hard nylon inserts, which corrected the problem.
With the release of the next series (SCPH-500x), the numbers moved back into sync. A number of changes were made to the unit internally (CD drive relocated, shielding simplified, PSU wiring simplified) and the RCA jacks and RFU power connectors were removed from the rear panel. This series also contained the SCPH-550x and SCPH-555x units, but these appear to have been bundle changes rather than actual hardware revisions.
These were followed by the SCPH-700x and SCHP-750x series葉hey are externally identical to the SCPH-500x machines, but have internal changes made to reduce manufacturing costs (for example, the system RAM went from 4 chips to 1, and the CD controller went from 3 chips to 1).
The final revision to the original PlayStation was the SCPH-900x series葉hese had the same hardware as the SCPH-750x machines with the exception of the removal of the parallel port and a slight reduction in the size of the PCB. The removal of the parallel port was probably partly because no official add-on had ever been released for it, and partly because it was being used to connect cheat cartridges that could be used to defeat the copy prevention.
The PS one was based on substantially the same hardware as the SCPH-750x and 900x, but had the serial port removed, the controller / memory card ports moved to the main PCB and the power supply replaced with a DC-DC converter that was also on the main PCB.
With the early units, many gamers experienced skipping full-motion video or dreaded physical "ticking" noises coming from their PlayStations. The problem appears to have come from poorly placed vents leading to overheating in some environments葉he plastic moldings inside the console would warp very slightly and create knock-on effects with the laser assembly. The solution was to ensure the console was sat on a surface which dissipated heat efficiently in a well vented area, or raise the unit up slightly by propping something at its edges. A common fix for already affected consoles was to turn the PlayStation sideways or upside-down (thereby using gravity to cancel the effects of the warped interior) although some gamers smacked the lid of the PlayStation to make a game load or work.
Sony then released a version dubbed "Dual Shock", which included a controller with 2 analog sticks and a built in force-feedback feature.
Another version that was colored blue (as opposed to regular console units that were grey in color) was available to game developers and select press. Later versions of this were colored green熔n a technical level, these units were almost identical to the retail units, but had a different CD controller in them that did not require the region code found on all pressed disks, since they were intended to be used with CD-R media for debugging. This also allowed the use of discs from different regions, but this was not officially supported; different debug stations existed for each region. The two different color cases were not cosmetic葉he original blue debug station (DTL-H100x, DTL-H110x) contained "Revision B" silicon, the same as the early retail units (these units had silicon errata that needed software workarounds), the green units (DTL-H120x) had Rev. C hardware. As part of the required tests, the user had to test the title on both. Contrary to popular belief, the RAM was the same as the retail units at 2 MB. The firmware was nearly identical葉he only significant change was that debug printf()s got sent to the serial port if the title didn't open it for communications葉his used a DTL-H3050 serial cable (the same as the one used for the Yaroze).
A white version was also produced that had the ability to play VCDs葉his was only sold in Asia, since that format never really caught on anywhere else. From a developer perspective, the white PSX could be treated exactly like any other NTSC:J PlayStation.
The PS1 with a model number of SCPH-1001 has been reported to be a very good sounding compact disc player rivaling audiophile CD players from high end audio manufacturers.
From Wikipedia, the free encyclopedia